Skip to content
Élise OSÉlise OS

Troubleshooting

elise.local does not respond

Section titled “elise.local does not respond”
  • Wait a few minutes after first boot: the preparation page appears as soon as the network is ready.
  • Check that the computer or phone is on the same network. Some guest networks isolate devices from each other.
  • Try the hub’s IP address, visible in your router’s interface, on port 8080.

Preparation stops on an error

Section titled “Preparation stops on an error”

The preparation page shows the error message. Élise retries automatically every minute. Without Internet, installation resumes when the connection comes back.

The Zigbee adapter is not detected

Section titled “The Zigbee adapter is not detected”
Fenêtre de terminal
ls -l /dev/serial/by-id/
cat /var/lib/elise/zigbee/status.json
elise logs zigbee2mqtt

If several serial ports are present, configure the adapter by hand (see Sensors and Zigbee adapter).

A sensor is silent

Section titled “A sensor is silent”

Check its battery and its distance to the hub or the nearest repeater. A mains-powered Zigbee plug often acts as a repeater.

The TV does not turn on

Section titled “The TV does not turn on”

  • Enable CEC and power-on by external device in the TV’s settings.

  • Use Reprendre la TV in Écran et appels.

  • Check the screen agent:

    Fenêtre de terminal
    journalctl -u elise-screen-agent -n 50

Overall status

Section titled “Overall status”
Fenêtre de terminal
elise status
curl -fsS http://127.0.0.1:8080/api/v1/system/health